DMP1616
MORE INPUTS, MORE OUTPUTS, MORE FLEXIBILITY
Designed specifically for installed sound, the Asystems’ DMP1616 automatic mixers combine clean, simple designs with smart signal processing. All 16 inputs to the DMP1616 are achieved through professional-standard 3-pin euroblock connectors for balanced connections. The system further includes 16 euroblock output connectors. All inputs and outputs are utilized through the flexible matrix routing system, controlled via the included user-intuitive PC software. This software also allows you to control the extensive on board signal processing, including 4-band parametric EQs, feedback silencers, duckers, noise-gates, compressors, limiters and, of course, automatic mixing including NOM (Number of Open Microphones) compensation. With flexible networking capabilities and highly accurate automixing, the DMP1616 Digital Matrix Processor is a must-have for all large commercial installations.
|
|
Front PanelThe attractive, machine-milled front panel of the DMP1616 is elegantly simple, featuring sixteen signal LEDs for each of the input channels and another sixteen for the outputs. Also included is a power LED in addition to a bi-colored ‘disable’ LED. The front-panel power switch can be disabled from the Asystems control software, which activates a yellow LED indicator (also on the front panel). Once the physical power switch has been disabled, it can only be activated from the DMP1616’s software control panel. This subtle but important feature prevents accidental shutdowns from wandering fingers. Integrated rack ears make the single unit DMP1616 readily rack-mountable. Rear Panel |
DMP1616 | |
Frequency Response | 20Hz-20kHz, +/-1dB |
Damping Factor (8 ohm load, <1kHz) | >250 |
Input Impedance | 20K Ohm, balanced |
Maximum Input Level | +24dB |
Cooling | Temperature dependent speed-controlled axial fan |
Control Network | Onboard, compatible with standard 100MB Ethernet hardware |
Front Panel Indicators | 16 x Input Signal, 16 x Output Signal, Power, Disable |
Attenuators | Software-controlled levels |
Input Connections | Euroblock |
Output Connections | Euroblock |
Amplifier Protection | Inrush current limitation, temperature monitoring, output over-current protection, mains fuses |
Power Supply (Region Dependent) | 120VAC, 230VAC, 50/60Hz,15A Edison cable |
Dimensions (W x H x D) | 45 x 459 x 281 mm (1.8″ x 18″ x 11.1″) |
Weight | 3.5 Kgs (7.9 lbs) |